分类列表
实验用注液机
  • 实验用注液机
  • 在线询价
    详细内容

    实验用注液机主要功能及原理先容:

    此设备用于18650锂电池加注电解液的生产设备,通过电动陶瓷注液泵,经X,Y轴机械手将注液头前后左右移动把电解液加注到18650电池上部直口内,1盘电池144颗电池,144颗电池加好液,真空箱下压密封,通过抽真空和加压方式,把电解液注入到电池内部,整全过程须要注5唇鹕嘲拿诺锹酵竞;抽真空约10次左右,(此项视电解液渗透情况而定,非绝对值)

     

       This equipment is used for electrolyte injection for 18650 lithium batteries. Through the electrical ceramic inject pump, the injection head is controlled by a 2 axis robot arm to inject the electrolyte into the upper opening of the 18650 batteries. There are 144 batteries in a single plate. After the injection is finished, the batteries are put into a vacuum box, left standing still under high pressure and vacuum alternately to ensure the batteries fully absorb all the electrolyte. During the process, there will be around 5 injections and 10 vacuum treatments. (However the numbers may vary depending on the electrolyte penetration.)

     锂电池注液机



     

    5.6设备技术规格 Equipment Specification

    参数名称

    Names

    技术参数

    Values

    备注

    额定电压

    Rated   Voltage

    AC220V   50Hz


    控制电压

    Controlled   Voltage

    220V


    总功率

    Power

    3KW


    压缩气压

    Compressed   Pressure

    0.7mpa


    真空

    Vaccum

    -0.095%


    氮气

    Nitrigen  

    0.3mpa


    生产效率

    Production   Rate

    10-15ppm/min

    此产品视电池容量和工艺不同,产生会有所差异

    This   will varydepending on the different battery volume and manufacturing process.

    注液精度

    Injection   Accuracy

    ±0.1

    ±0.1   g

    注液泵每次注液量偏差≤0.02克

    The variation of the   injection quantity of the pump is ≤0.02 g

    设备外形尺寸(长*宽*高)

    Dimensions   (Length*Width*Height)

    2.4M*1.16M*1.8M


    稼动功率

    Utilization   Rate

    95%


    生产合格率

    Pass   Rate

    99.5%


    有效除湿体积

    Effective   Dehumidifcation Volume

    2.5m3


    漏气率Leakage Rate

    <0.05 VOI%/小时





    上一篇:半自动注液机
    下一篇:单头注液泵

    分享到

    XML 地图 | Sitemap 地图